Trützschler
Trützschler 
TC 19i: The first intelligent card with gap optimizer automatically and permanently adjusts the ideal carding gap.
The producer of textile machinery Trützschler GmbH, Mönchengladbach /Germany, presented at the ITMA 2019 from June 20-26, 2019, in Barcelona/Spain, new solutions for spinning preparation, nonwovens & man-made fibers.
The new intelligent card TC 19i automatically and continuously optimizes the carding gap whose setting has a critical influence on quality and performance. With a precision not achievable by humans, the intelligent card permanently realizes even the narrowest carding gap setting of 3/1000 inch. In addition, new cloud-based digital monitoring and management systems provide yarn manufacturers with transparency over all processes in the spinning mill. The My Wires app, for example, provides information on the status of clothings and service intervals and helps with the planning of reorders. Competent service for re-clothing can be provided immediately by Trützschler Card Clothing (TCC). These digital platforms are not exclusive to Trützschler technology.
An innovation in the blowroom offers more economy and quality as well: The Portal Bale Opener BO-P, with widths of 2,900 mm or 3,500 mm, allows significantly more bales to be placed side by side and processes them in parallel using 2 opening rolls. Thus, it results in significantly better blending and higher productions of up to 3,000 kg/h. As a complete supplier for spinning preparation, Trützschler is also breaking new ground in draw frames, the quality filters in the spinning mill. The autoleveller draw frame TD 10 automatically adjusts the break draft for optimum sliver quality and realizes cost savings due to its compact design and energy-efficient suction system. Like the TC 19i and the BO-P, the TD 10 provides the operator-friendly T-LED remote display which visualizes important machine and production information in a simple way.
An innovation in the blowroom offers more economy and quality as well: The Portal Bale Opener BO-P, with widths of 2,900 mm or 3,500 mm, allows significantly more bales to be placed side by side and processes them in parallel using 2 opening rolls. Thus, it results in significantly better blending and higher productions of up to 3,000 kg/h. As a complete supplier for spinning preparation, Trützschler is also breaking new ground in draw frames, the quality filters in the spinning mill. The autoleveller draw frame TD 10 automatically adjusts the break draft for optimum sliver quality and realizes cost savings due to its compact design and energy-efficient suction system. Like the TC 19i and the BO-P, the TD 10 provides the operator-friendly T-LED remote display which visualizes important machine and production information in a simple way.